Scheepskabel

RFE-FRHF(i)+WSR/WJR 250V

DownloadDatasheet PDF RFE-FRHF(i)+WSR/WJR 250V Fire Resistant + Water Spray Resistant and/or Water Jet Resistant armoured and individually screened instrumentation and... read more

Beschrijving

Download
Datasheet PDF

RFE-FRHF(i)+WSR/WJR 250V

Fire Resistant + Water Spray Resistant and/or Water Jet Resistant armoured and individually screened instrumentation and communication cable 250V

Application: For fixed installation in most areas and on open deck in ships and off shore units. Especially intended to ensure the availability of all critical transportation-, comfort- and safety systems, i.e. to meet the concepts of; Orderly Evacuation (3 hours burning time) and Safe Return to Port (Fire test with simultaneous Water Spray / Water Jet + mechanical shocks) to simulate the firefighting conditions.
If the cable is exposed to direct sunlight, we recommend cable with black outer sheath or a protective covering.

Main characteristics
Rated voltage 150/250V (300V)
Halogen-free IEC 60754 series
Flame-retardant IEC 60332-1-2 -test for single insulated wire and cable
IEC 60332-3-22 -test for bunched wires and cables, category A
Smoke emission
Fire- and Water Spray Resistant IEC 60331-2 (180 min test) + EN 50200:2015 Annex E (diameter ≤ 20 mm)
Fire- and Water Jet Resistant IEC 60331-1 (180 min test) + BS 8491:2008 (diameter > 20 mm)
Oil resistance (only SHF2) IEC 60811-404 conditions according to 60092-360/SHF2
For details see general information section
Electrical data: 0,75mm2 1,5mm2 Unit
Loop resistance of pair, max. / +20°C 52 24,4 ohm/km
Pair capacitance, nom. / 1 KHz 55 75 nF/km
Loop inductance, nom. 0,6 0,7 mH/km
Insulation resistance / +20°C ≥1500 ≥1500 Mohm/km

Recommended minimum bending radius (fixed installation): 4 x outer diameter of the cable

Temperature rating: Maximum conductor temperature + 90 °C
Fixed installation -40 °C to +80 °C
Minimum recommended installation temperature -15 °C
For details see general information section

 

Part number Number of conductors & cross-section
n x mm2
Nominal outer diameter
mm
Approximate weight
kg/km
Min. bending radius fixed installation
mm
620546 1x2x0,75 9,5 120 55
620548 2x2x0,75 Quad 11,0 170 65
620550 2x2x0,75 14,0 225 85
620552 4x2x0,75 16,5 345 100
620554 7x2x0,75 20,0 495 120
620556 8x2x0,75 21,0 545 125
620558 10x2x0,75 24,5 675 145
620560 12x2x0,75 25,5 770 155
620562 14x2x0,75 27,0 865 165
620563 16x2x0,75 29,0 970 175
620564 19x2x0,75 31,0 1105 185
620566 24x2x0,75 35,0 1370 210
620603 1x2x1,5 10,5 160 65
620604 2x2x1,5 Quad 12,0 225 70
620605 2x2x1,5 16,0 335 95
620607 4x2x1,5 19,0 470 115
620609 7x2x1,5 22,5 710 135
620611 8x2x1,5 24,0 795 145
620513 10x2x1,5 27,5 970 165
620615 12x2x1,5 29,0 1130 175
620617 14x2x1,5 31,0 1275 185
620619 16x2x1,5 33,0 1430 200
620621 19x2x1,5 35,5 1640 215

 

Other sizes on request.

Part number for oil resistant SHF2 cable:
4 + code from above table ➞ 4xxxxx

Ship cable

RFE-FRHF(i)+WSR/WJR 250V

DownloadDatasheet PDF RFE-FRHF(i)+WSR/WJR 250V Fire Resistant + Water Spray Resistant and/or Water Jet Resistant armoured and individually screened instrumentation and... read more

Beschrijving

Download
Datasheet PDF

RFE-FRHF(i)+WSR/WJR 250V

Fire Resistant + Water Spray Resistant and/or Water Jet Resistant armoured and individually screened instrumentation and communication cable 250V

Application: For fixed installation in most areas and on open deck in ships and off shore units. Especially intended to ensure the availability of all critical transportation-, comfort- and safety systems, i.e. to meet the concepts of; Orderly Evacuation (3 hours burning time) and Safe Return to Port (Fire test with simultaneous Water Spray / Water Jet + mechanical shocks) to simulate the firefighting conditions.
If the cable is exposed to direct sunlight, we recommend cable with black outer sheath or a protective covering.

Main characteristics
Rated voltage 150/250V (300V)
Halogen-free IEC 60754 series
Flame-retardant IEC 60332-1-2 -test for single insulated wire and cable
IEC 60332-3-22 -test for bunched wires and cables, category A
Smoke emission
Fire- and Water Spray Resistant IEC 60331-2 (180 min test) + EN 50200:2015 Annex E (diameter ≤ 20 mm)
Fire- and Water Jet Resistant IEC 60331-1 (180 min test) + BS 8491:2008 (diameter > 20 mm)
Oil resistance (only SHF2) IEC 60811-404 conditions according to 60092-360/SHF2
For details see general information section
Electrical data: 0,75mm2 1,5mm2 Unit
Loop resistance of pair, max. / +20°C 52 24,4 ohm/km
Pair capacitance, nom. / 1 KHz 55 75 nF/km
Loop inductance, nom. 0,6 0,7 mH/km
Insulation resistance / +20°C ≥1500 ≥1500 Mohm/km

Recommended minimum bending radius (fixed installation): 4 x outer diameter of the cable

Temperature rating: Maximum conductor temperature + 90 °C
Fixed installation -40 °C to +80 °C
Minimum recommended installation temperature -15 °C
For details see general information section

 

Part number Number of conductors & cross-section
n x mm2
Nominal outer diameter
mm
Approximate weight
kg/km
Min. bending radius fixed installation
mm
620546 1x2x0,75 9,5 120 55
620548 2x2x0,75 Quad 11,0 170 65
620550 2x2x0,75 14,0 225 85
620552 4x2x0,75 16,5 345 100
620554 7x2x0,75 20,0 495 120
620556 8x2x0,75 21,0 545 125
620558 10x2x0,75 24,5 675 145
620560 12x2x0,75 25,5 770 155
620562 14x2x0,75 27,0 865 165
620563 16x2x0,75 29,0 970 175
620564 19x2x0,75 31,0 1105 185
620566 24x2x0,75 35,0 1370 210
620603 1x2x1,5 10,5 160 65
620604 2x2x1,5 Quad 12,0 225 70
620605 2x2x1,5 16,0 335 95
620607 4x2x1,5 19,0 470 115
620609 7x2x1,5 22,5 710 135
620611 8x2x1,5 24,0 795 145
620513 10x2x1,5 27,5 970 165
620615 12x2x1,5 29,0 1130 175
620617 14x2x1,5 31,0 1275 185
620619 16x2x1,5 33,0 1430 200
620621 19x2x1,5 35,5 1640 215

 

Other sizes on request.

Part number for oil resistant SHF2 cable:
4 + code from above table ➞ 4xxxxx